Slimelite BBS

WALKMAN

Back to AMIGA_VIDEO

From Tom Lamb · 1996-04-01 13:31 · #76606 in AMIGA_VIDEO

===========================================================================
 BBS: Over The Coffee BBS
Date: 03-29-96 (22:23)             Number: 33714
From: CORY MASON                   Refer#: NONE
  To: ALL                           Recvd: NO
Subj: WALKMAN                        Conf: (35) Science
---------------------------------------------------------------------------
CM>I need to convert my walkman from 2 AA bateries to 1 9 volt battery.

CM>I've done everything except put in the resister. I am using this equation:

CM>R = V
CM>   ---      R being the resistance that I need to put in to lower
CM>    I       9volts to 3.0volts I don't know what to do from here.

CM>Is this write?

CM>R = 9V - 3.0V
CM>    ---------     How would I find "I" I know there is a way, I just can't
CM>        I         recall how.

     Gary: A few things to consider. I'm not familiar with the
     Walkman,but it may draw too much current to be practical from a 9v
     battery if you want the use the little transistor battery, which
     just does not have the capacity of the AA cells. And you loose much
     in the resistor.

     There is a problem with the current, in that it may vary with the
     setting of the machine (?). For example, in a cassette, there is a
     considerable variation among play, record, fast, etc.

     The only way to determine the current is to measure it with a panel
     dc ammeter. (Don't try an electronic DVM or a multimeter, they drop
     too much voltage to be used on a 3v circuit). The manual may list
     the power use, don't know.

     Not knowing why you want to use a 9v batt, generally I would say
     that you should not try what you have asked. You risk: short
     battery life, and possible equip damage from overvoltage.

     There is another way which I often use. Leave the AA cells in
     place, then arrange for the 9v (in my case a 12v car) to "charge"
     the AA cells with the same amount of current needed by the equip.
     This way the AA cells are not drained (nothing is perfect) and the
     AA cells control the voltage level at 3. In effect the cells are
     acting like a 3v zener diode. This works so long as the cells are
     connected to the system.

     There are other ways (3v zener) but they may be more complicated
     than you want.  Tom, SW Colorado

--- FLAME v1.1
 * Origin: Over The Coffee BBS - Montrose, CO (1:15/48)