From Chris Lawrence · 1996-04-01 09:56 · #76554 in AMIGA_VIDEO
Hi James, James Johnson wrote in a message to Chris Lawrence: CL> create a transmission hologram of a guitar sounding board (is that the CL> right term?) and develop it. JJ> Right term? I'm not sure cos I don't really think I understand what JJ> you mean. :/ I'm on about the part of the guitar which vibrates - the wooden part with the hole in (oh dear, what is it called)? CL> Then you can resonate the soundboard with a signal generator, CL> small amp and a small speaker connected to it (eliminates the CL> problem of strumming the strings), make a second transmission CL> hologram and develop that. I didn't mention that "the problem of strumming the strings" is one of vibration. Holograms rely on interference of coherent light falling on the film. Any movement to within a fraction of the wavelength of light during exposure will change the interference pattern being 'filmed' and will wash out the image. Actually, I made a mistake. You can only use the 'two holograms method' for examining, say, stress on an object, because for each hologram, the object must be absolutely still, as explained above. For the guitar, you can use the 'live' method, and examine interference fringes in real time. CL> Then view both holograms together and provided they're realigned CL> perfectly, you will see interference fringes which show where the wood CL> moved relative to the first (quiet) position. JJ> I get that bit. :) Sounds interesting.. The wood doesn't move relative to the first position, because it is -constantly- moving relative to it, all the time that the guitar is making a noise. That was my mistake. This makes me think that you could could get 'snapshots' of the effect by making a hologram of a guitar being sounded - then the moving wooden part would appear dark on the hologram where the movement washed out the fringes at that point. I never thought of that (nor tried it)... JJ> How would I go about creating these holograms? You need a laser, which can be fairly low power - a 30mW Helium-Neon laser is more than enough. You need a vibration-free surface (an expensive optics table would be fine but a large piece of wood or metal resting on an array of partially inflated inner tubes works very well (providing that you load the surface with as much mass as possible. Then you need some specialised optical components. This is the expensive part (besides the laser). You need a -good- film holder, at least one large (A4-A5 sized?) mirror and a beam expander. The mirror must be front-silvered and although the beam-expander can be a simple lens, a spatial filter is much more preferable. Then you need some way of holding these components still (mag-mount bases for a steel surface work very well). You need film (in your case, plates), such as Ilford Hotec/R, proper developer and bleach and a safe-light with a suitable green filter (cheap green plastic is just no good - all sorts of other wavelengths can pass through it). And you need somewhere to set it all up, which is as vibration free as possible and which has nearby running water and a sink for the developing. Later, you can get more components - another large mirror, small mirrors with X-Y adjusting screws, another spatial filter, a beam splitter, a netral density filter (which evenly reduces the intensity of the light) - and you could go on and on. JJ> I just wonder if it's anything that possible at my school. :/ I hope I don't put you off by mentioning all the above, but going into it half-prepared will lead to disappointment, belive me. Ask your school science department what they have - they may well have a low power HeNe laser already. JJ> Definitely.. Please could you send me any more information you have JJ> on this subject? Thanks, I appreciate your help, Try a search in your local library for 'holography'. There are a number of books, many of which will mention interferometry. Look for books by a man named Saxby, which are excellent. Regards, Chris - in Liverpool, UK FidoNet: 2:250/163.7 - Internet: chrisl@wsbbs.sentinel.co.uk --- timEd/386 1.10+ * Origin: Chris' point off -=Worcester Sauce=- Manchester, UK (2:250/163.7)