Slimelite BBS

Re: Seized Clutch.

Back to DARKSIDE_CODE

From Andrew Grillet · 1996-04-06 02:35 · #75400 in DARKSIDE_CODE

In reply to Seized Clutch. by Clive Jones

 -=> On 01 Apr 96  08:37:00 Clive Willis said to All <=-

 CW> Hi,

 CW> The clutch on my friends '78 Chrysler Sunbeam has seized on.  Not
 CW> supprising really seeing as the car hasn't been driven for a few
 CW> years.  Does anyone know how to make it disengage?  It's cable
 CW> operated rather than hydraulic.  You can put the clutch pedal to the
 CW> floor, but the gears still crunch.

is the cable intact? Look under the bonnet - you should see the lever
that the cable pulls on sticking out of the bell-housing. Lever it
with a 'stout object' (that doesn't mean a can of guiness:-) and see if
you can disengage it that way. Its quite possible the cable has stretched
and you might just have to replace it UKL15 or so, and 30mins work. If not,
you will have to split the engine from the bell housing, and strip the whole
lot. Probably fit new clusth plates. UKL45 ans 30 mins work, AFTER you
get the engine/gear-box split. Then you reassemble. OR UKL60 at
'Clutches-R-Us'. (And you dont even get your hands dirty).

Andrew


... Real programmers practice safe HEX.
--- Blue Wave/Max v2.12 OS/2 [NR]
 * Origin: Me/2 <Meet-You> (2:254/259)