Slimelite BBS

Seized Clutch.

Back to DARKSIDE_CODE

From Clive Jones · 1996-04-05 13:49 · #75397 in DARKSIDE_CODE

In reply to Seized Clutch. by Clive Willis

 On 01 Apr 96  08:37:36, Clive Willis wrote to Clive Jones

 Hi Clive,

 > The clutch on my friends '78 Chrysler Sunbeam has seized on.  Not
 > supprising really seeing as the car hasn't been driven for a few
 > years.  Does anyone know how to make it disengage?  It's cable
 > operated rather than hydraulic.  You can put the clutch pedal to the
 > floor, but the gears still crunch.

No guarantees but you can try this. First bring the car to full (normal) operating temperature. Do not try to engage gears at this stage.
Allow the vehicle to idle at this temperature for at least fifteen mins.
Then provided the brakes are not also siezed, switch off the engine, engage second gear and rock the car back and forth, with luck the clutch will free. Iff this does not succeed on the first attempt leave the engine off for twenty minutes. This will allow the engines heat to transfer down through the flywheel to the clutch area. Then try the procedure again.
If this does not work try towing the car in third or fourth gear a short distance once the heat is there.


All the Best,
Clive Jones

---
 * Origin: C.A.L.M. BBS Rochdale, Lancs, USR V everything (2:250/153)