Slimelite BBS

Pace power supplies

Back to UK_HST

From Phil Burden · 1996-04-14 23:57 · #74843 in UK_HST

In reply to Pace power supplies by Peter Dalton

On Apr 13 18:11 96, Peter Dalton of 2:250/107.80 wrote:

PD> PC power units are much larger than a sat receivers and I suspect
PD> (though don't know for sure) that they are based on transformers rather
PD> than switch-mode, and IMO transformers are far more reliable. The major
PD> difference is certainly cost, with PC PSU's costing probably L20 to
PD> produce and a sat recievers costing a couple of quid!

most pc psu's,well half decent ones,are switched mode type.It seems a trend nowadays,most of the new high end photocopiers I work on,the digital ones,have switch mode psu's,relatively fault free,except for those made by Toshiba,terrible soldered joints ;-)

PD> erm 920? Do you mean 9200? I have service manuals for the older sets,
PD> Amstrad 400, 500, 510 and Pace 9000, 9200 and 800/900. As I stopped
PD> installing a couple of years ago I haven't bought the newer manuals or
PD> kept fully up to date with the current model numbers, sorry. I still get
PD> the Pace Service Matters with up to date info though, and I'll probably
PD> get Eurosats Repairs Manual III in the near future for reference.

the 920 is the D2Mac receiver...not sure how old it is,a few years at least.

PD> Changing the components isn't as bad as it looks, I do one at a time and
PD> work steadily through it. The worst problem you will have is that some
PD> circuit tracks are a bit fragile and can be 'lifted' by applying too
PD> much heat. I use a solder-sucker which isn't the best thing to use (but
PD> it's all I have and I can't get on with braid!) and can damage the pads
PD> that the control chip attaches to.

can't seem to get the hang of braid,nor a pair of tweezers to sink the heat,so I guess the odd solder pad is likely to go,keep a bottle of silver paint handy,works wonders ;-)

PB>> I noticed that there are two supply ccts in the Pace,does the kit

PD> two supply circuits?

definitely 2 bridge networks,along with a 14/16 pin chip,and around 10/12 caps,assorted resistors & diodes.
 
Phil

--- Msgedsq/2 3.20
 * Origin: R25 Ogate (2:25/997)