From Peter Dalton · 1996-04-08 21:24 · #74802 in UK_HST
In reply to Re: Sat receivers with 2 LNB inputs by Geoff Kula
In a message to Peter Dalton <07 Apr 96 20:40> Geoff Kula wrote: Hi Geoff, GK> I soldered the cores, taped over them, soldered the braids together, GK> wrapped some kitchen foil around the joint and yes that works as well as anything. It's not something I've done often, but when I've needed to solder a couple of lengths together I've done so with the two inner conductors 'butted-up', ie pointing directly at each other and about 1/16th of a inch apart. Then I've soldered another small piece of wire next to the main one as a sort of 'splint'. The solder obviously flows into the butt and the advantage is that the signal keeps travelling in a straight line through the joint and this gives minimum loss. GK> Anyhow, I will be upgrading soon to Astra + Eutelsat, so I'll bear your GK> baccy tin idea in mind. it's a cheaper method of trying out Eutelsat/Astra before you rush out and buy a two-input reciever... Good Luck Peter --- PCRR 1.05/b+ * Origin: Aspects BBS - Manchester UK - +44-61-792-0260 (RA 2:250/107.80)