From Geoff Kula · 1996-04-08 02:40 · #74788 in UK_HST
In reply to Sat receivers with 2 LNB inputs by Peter Dalton
-=> Quoting Peter Dalton to Geoff Kula <=- GK> Never had the chance to play with a "capable" sat receiver which GK> boasts 2 x LNB inputs. PD> you could make a manual switch by placing a small switch into a metal PD> can, soldering the centre cores to the switch and the screen conductor PD> to the can...I used an old tobacco tin for mine (total cost about L1) PD> :-) Thanks for that Peter. I also had to make a join in a length of Sat coax (indoors) 'coz somebody (?) bust through the cable with a settee castor! I soldered the cores, taped over them, soldered the braids together, wrapped some kitchen foil around the joint and then taped around the whole lot. The signal was as good as before it busted ... without the foil, the sparklies were attrocious even though the exposed joint was <1" long! Anyhow, I will be upgrading soon to Astra + Eutelsat, so I'll bear your baccy tin idea in mind. Ta .... Geoff ... Catch the Blue Wave! --- Blue Wave v2.12 [NR] * Origin: Cell Block H +44(0)161-747-0964 - 24hrs, VFC/V34 (2:250/168)