Slimelite BBS

Re: Transistor voltage compare

Back to KERRANG

From Richard Gregory · 1996-04-08 07:26 · #69132 in KERRANG

In reply to Transistor voltage compare by Michel van der Heijden

Hello Michel,

In a message on 31 Mar 96, you wrote to me:

 RG> I've now built it but I want remove the op-amp from the circuit
 RG> because it restricts the supply voltage.

 RG> working in the 6 volt supply range (comparing from 0V to 4-5Vish).

MVDH> But a plain 741 will work with voltages up to +18V so i don't see the
The upper limit isn't the problem, its the lower limit thats the problem
because it would be running off batteries.  The 741 needs a minimum 
potential of 6V (although I'm using 8V just to be sure).
Also, the 0V I refer to is at the same potential as the 741's Vee. As you
probably know the 741 won't work that close to it's power rails.

I've got around the 0V problem by biasing the input but this isn't ideal
because it makes the one input slightley non-linier.


So what I'm after is a transistor circuit that will compare two voltages
without the awkward supply voltage problem and the comparing close to the
(0V) supply rail problem.  The comparer can still use a regulated voltage 
source (a constant voltage is required by the other parts of the circiut).

The only thing I can think of is to invert one input and then add it
(via a bridge or potenial divider) and compare to +V/2, the problem is
I don't have enough data on transistors to work it all out.  But I can
say with almost certainty that is won't be linier(though it won't matter
if both inputs suffer the same distortion).


Richard

--- Blue Wave v1.0
 * Origin: Xstream 44-151-488-0698 V21-V34 [OS2/Max3.00/Md1.02e] (2:250/210)