From Andy Ball · 1996-04-05 03:54 · #69123 in KERRANG
Hallo Steven !
SH> I can turn the power which is going to the PSU off at the mains, and
> nothing happens to the quality of the sound. If I unplug the low
> voltage side of the PSU from the circuit, the quality goes down...
If the circuit is drawing a modest current, it could be that it's
using charge remaining in the smoothing cap of the PSU. You could test
that by either draining the cap with a resistor (say, 1K) or just
leaving the PSU connected to the circuit and seeing if the quality gets
worse over time (both of these need the PSU turned off ! ;o) The only
other thought that springs to mind would be to do with an improved
ground supplied by the PSU, but that seems a tad doubtful. I could have
a proper look at the circuit diagrams for both your circuit and the PC
parallel ports if that doesn't help...
Regards,
- andy.
--- Hqwk V6.5 [JetMail 0.99beta21]
* Origin: WALU minus the soft half ! (2:255/80@fidonet.org)