Slimelite BBS

Consequences Of Newman

Back to AMIGA_VIDEO

From Jack P Sargeant · 1996-04-02 17:05 · #76645 in AMIGA_VIDEO

===cut===
JD> Newman's claims are that his power source suffers from overcharging due
JD> to reverse current flow, or reverse "spikes". Since electronic circuits
JD> can be designed to redirect the current everytime it flows out of phase,
JD> or reaches a particular "cut of voltage", as dictated by proper
JD> circuitry, wouldn't it be a simple matter for anyone, from a electronic
JD> hobbyist to engineer, to redirect the power to make it harmless to the
JD> power source and useful for other things.

One who would build a house of cards cannot resist the temptation
to add just one more floor.

...But to answer your question, it is done all the time...  ...With
about 70 percent maximum efficiency on a good day.  Losses are
incurred at every voltage bridge or drop.  If all the heat wasted
could be salvaged, and the unused energy tapped, the efficiency may
rise to 80 percent (I'm an optimist).

In an electronic circuit, the main factor is resistance.
In a mechanical device, the main factor is friction (more resistance).

Now, there are always optical illusions that can fool the
non-professional would be de-bunker.  But for those who have
endeavoured to acquire an education in the sciences (of which I am
lacking), there is knowledge of the laws of physics which explain
why certain illusions are just that!

It was my intent to demonstrate a little tongue in cheek
theatrics with my expose of that doomsday machine! <G>  It is also
noted that most who make such claims as does Newman, are sorely
(and blissfully) lacking in education involving physics and
advanced mathematics.  They say such things as, "Since I never
learned it could not be done, I have gone and done it!"

JD> Your warning is entirely relevant and accurately applied. As soon as his
JD> machine was more than 100% efficient any attempt to make use of the
JD> output could become very interesting. Your beginning to see the dilemma
JD> of trying to control any PPM. Efficiency must be kept below 100%, but
JD> then without the 100%, it's not an over unity device. Excellent
JD> observation, Jack!

I stayed away from including any smileys or grins in my "warning".
...And besides, yesterday was afterall, "April fools day".  <G>

Jack

 * SLMR 2.1a * The straw that broke the camel's back also made bricks!
             
--- GEcho 1.11+
 * Origin: The Transporter Room: 16 lines SLIP/Telnet/FTP 704/567-9513 (1:379/1)