From Michael Walters · 1996-03-29 11:44 · #76509 in AMIGA_VIDEO
In reply to Re: acceleration by Michael Walters
Hello Ron, RF> I wouldn't use plastic line. It stretches and has hysteresis. I agree with you completely on this point. MW>My main question again is getting accurate dimensions. How would I measure >the length of the test line after it is hung? Remember I want to >measure a length of about 250 millimetres to within 25 micrometres >or a length of about 1 metre to within 100 micrometres. Even for >one metre the error must be within 100 micrometres or 0.1 millimetres. RF> And, you have to know the length to the CENTER of mass! At least, RF> I hope it's simply to the C.O.M. Actually, every element of mass and RF> it's distance from the pivot comes into play. That would be a reason RF> to minimize the mass of the line, but note what I said about plastic RF> line. I agree with you completely on this point too. The centroid of the line can be very well approximated to the middle of the line. If the spherical bob is very close to a true sphere in shape, its centroid can be considered to be the middle of any diameter. I am not always sure that spherical bobs are of true spherical shape. That is where one problem lies. But if the masses and centroids of the bob and line are well known, the centre of mass of the pendulum can be determined and the moment of inertia can be determined. RF> Seems the period of a pendulum is SQRT(L/G). For SMALL RF> oscillations. That's independent of the mass if it's all at one RF> point. To make 'L' well defined one makes the major mass as high as RF> reasonable. This also minimizes some other sources of variation. I would define L by the moment of inertia and its effect on the time of oscillation through the moment applied from the centre of gravity, with a bigger moment of inertia slowing down the pendulum. Thank you , Michael ... What color does a chameleon change to when it looks in a mirror? --- Blue Wave/Max v2.12 * Origin: TechTalk; Calgary, Alberta. V.34+ (1:134/40)