From Ron Freimuth · 1996-03-29 10:21 · #76494 in AMIGA_VIDEO
PD> RF> As far as I know, I have the best derivation for the voltages
> RF> and currents in a capacitor filtered rectifier system. One I
> RF> verified to 0.1%. Actually, I knew they were very good before
> RF> I did a careful experiment.
PD> RF> Never got around to publishing the equations. The math isn't
> RF> that much, once one *knows* what to approximate. Though, it does
> RF> involve some integration over variable limits and a little trig.
PD> You should write it up two ways: one as a story about your experience,
> with the equations as a side note (human interest, and how one can
> forge ahead in engineering); the second should just do the derivation
> and describe how you verified the results.
Well, they would be worth publishing since I've never seen anything
better. In 1943, Schade published experimental curves for capacitor
filtered rectifier systems. The resolution was pretty poor - my
equations showed they were off 10% - 20% in AC current. His curves
were for high drop vacuum tube rectifiers, which would have made an
analysis much more difficult. I didn't have to worry about that effect
with silicon rectifiers. One can do well by simply considering they
have a small series resistance (which adds to Rs) and drop the DC
output about 1.0V for each series diode.
Another simplification I used was to assume the filter capacitor was
infinite size; in practice, most designs require a capacitor that's
large to satisfy that approximation in the analysis. One can still
estimate the ripple quite well for a finite sized capacitor.
In fact, it looks like one could account for a smaller capacitor by
a secondary analysis, after the first stage. This is certainly common
in physics problems.
I used Schade's curves to design HV power supplies before I entered
college, they were reproduced in two of my design books.
PD> I don't know which engineering journals would be interested, but
> just send them both out to all the ones you know. Then you might
> become famous. ;-)
One of my Stanford professors was editor of an appropriate IEEE
publication. I didn't take advantage of it.
I've thought of putting the equations in a program for designing
transformers that supply rectifiers. When I got prototypes they were
usually off by 10% or more on DC voltage at rated load. Clearly
designed by rule of thumb.
Then, I'd have to market the application to appropriate places.
PD> RF> Basic Statics and Dynamics?
PD> No, analytical mechanics.
I don't know just how that differs from Dynamics. Probably more
mathematically advanced.
PD> RF> There is a terrible general vector equation in dynamics that covers
> RF> everything: rotation, translation, etc.
PD> I guess we missed that one! But we did do a lot with rotations:
> action-angle variables and the Euler equations. Then we went into
> Lagrangians and the Hamiltonian principle.
Hamiltonians and 'generalized coordinate systems' were mentioned in
my course.
PD> It's really a lot more fun than I expected. I have another semester
> of mechanics to take in the fall, using Goldstein's text.
I don't think any Engineers had FUN in the courses I took.<g> Of
course, it's better when you are taking what you want, a little at a
time.
So, are thinking of a PhD?
---
* OLX 2.1 TD * Erudition is a poor substitute for cognition
--- FidoPCB v1.5 beta-'j'
* Origin: Lunatic Fringe * Richardson,TX * 214-235-5288 * (1:124/2113)