Slimelite BBS

Disc-Lock wheel nuts

Back to DARKSIDE_CODE

From John Butler · 1996-03-30 18:36 · #75375 in DARKSIDE_CODE

On (22 Mar 96) Ben Lovejoy wrote to All...

 BL> Police are calling for legislation to force lorries to be fitted with a
 BL> new type of wheel nut which cannot come undone.
 In one case, a lorry lost a wheel
 BL> while travelling on a bridge over the M1. The wheel jumped the
 BL> crash-barrier and struck a car below, killing the driver instantly, and
 BL> rolled for a further 290m, demolishing an electricity junction box
 BL> en-route but thankfully not striking any further vehicles.

The senior mechanic and the transport manager are now behind bars because of
this instance. It was totally bad servicing that caused this accident, the
driver reported the problem in the morning but the decision was made just to
leave it until that evening when the vehicle was due to some in for its MOT
check......

 BL> There are two solutions to the problem, one low-tech, one hi-tech. The
 BL> low-tech solution is to paint lines on the nuts to show any movement. The
 BL> trouble with this is that it still requires a manual check. A slightly
 BL> improved version of this is offered by nut covers which provide a much
 BL> easier visual check. They are fitted with a flourescent arrow pointing at
 BL> the next nut. A driver can instantly see whether all the arrows are
 BL> aligned. These covers cost 10p each.

These for the transport community are the easier option, cheap and
practicle, but the problem still arises if the driver doesn't do his daily
checks.

 BL> The hi-tech solution is a special nut known as a Disc-Lock nut.

 BL> They cost 40 each to retrofit. This is expensive, but, say police, cheap
 BL> compared to the alternative of wheels continuing to come off. Several US
 BL> truck and bus manufacturers now fit Disc-Lock nuts as an option, but no
 BL> European manufacturers have yet followed suit.

Aye because in a say a standard triaxle set up... i.e. unit and triaxle
trailer you are talking about a minimum of 120 wheel nuts and at 40.00 each
that is another 5,000. Now multiply that by a wee fleet 20 units and 40
trailers and you are talking mega bucks.

I know there is no substitution when it comes to road safety, but we as an UK
industry are hampered already with high running costs compaired with our EU
friends and something like this would certainly hobble us further...

Any one with any other ideas?...

          ===========================================================
          #  Johnb@cqm.co.uk    |  Fidonet 2:259/2.22               # 
          # Web: http://users.colloquium.co.uk/~johnb/captainp.htm  #



... Every time my car passes a scrap yard it gets homesick.

--- PPoint 1.92
 * Origin:  (2:259/2.22)