Slimelite BBS

5 [1 of 14] ISDN FAQ

Back to CYBERSPACE

From Dave Osborne · 1996-04-04 02:35 · #75333 in CYBERSPACE

2.05) Can the existing local loop lines be reused for ISDN?

The ISDN pairs are the same wires as used for regular telephone
service.  If you became an ISDN user at home, the same wire pair that
now provides your telephone service would be used to provide ISDN
(assuming you no longer have the regular line).

Most of the lines do not require any special conditioning.  Yes, if
a line has load coils on it they must be removed, BUT load coils
are usually only found on existing lines that are 15,000 feet or
longer.  As to lines with bridge taps, the 2B1Q line transmission
scheme (not to be confused with 2B + D channelization) is tolerant
of a certain amount of bridge taps and, therefore it is only a minimal
subset of existing lines (lines with bridge taps whose total length is
greater than 3000 feet for the bridge taps) that would require
special "de-conditioning."

With those things as the criteria, (in North America) we find than
generally around 90% or so of existing telephone lines need no
"de-conditioning" in order to be used for ISDN BRI service.

billsohl@planet.net (sohl, william h)
------------------------------

2.06) How does this compare to regular phone lines?

The ISDN line may act like two independent phone lines with two numbers.
Depending on the CO equipment, conferencing features etc. may be available
(conferencing in the telephone switch).  BRI ISDN phones can support key-set
features such as you would expect to get on an office PBX like:
     - multiple directory numers per line.
     - multiple lines per directory number.
     - conferencing features.
     - forwarding features.
     - voice mail features.
     - speed call.
     - call park.
     - call pickup.
     - ring again.
     - textual status displays.

curt@kcwc.com (Curt Welch)
glarson@bnr.ca (Greg Larson)
------------------------------

2.07) Is caller ID available on ISDN?

Caller ID (name or number display) may be supported (depending on the
CO setup). The availability of caller ID for residential phones would
depend on the capabilities of the local phone network and legislation
allowing or disallowing caller ID.  The availability of Caller ID
relies on the underlying switching protocol used by the switches
that make up the telephone system (e.g. SS7).

curt@kcwc.com (Curt Welch)
glarson@bnr.ca (Greg Larson)
kumquat@hill.com (Gary C. Kessler)
------------------------------

2.08) What do I get above and beyond plain old telephone service?

Plain old telephone service is transmitted between the central office
to your home or office telephone set (or modem, or fax) in analog
form.  At the central office, the analog signal is converted to a
series of digital samples at a rate of 8000 samples per second.  Each
sample is seven or eight bits in length.  As the signals for a
telephone call move around the central office, or between central
offices, they are transmitted in digital form.  Thus, a telephone call
consumes a transmission bandwidth of either 56 or 64 kilobits per
second.  The theoretical (Nyquist) limit for the frequency response of
a signal sampled 8000 times per second is 4kHz.  However, due to
various losses in the telephone system, the frequency response of an
ordinary telephone call is usually quoted as 3.1kHz.  Ordinary
modem-based data transmission uses schemes for encoding data in an
analog signal so it fits in this 3.1kHz bandwidth.  14.4kbps is a
commonly available transmission rate at the high end of the scale.
With this transmission rate, over three-quarters of the bitrate handled
by the central office is wasted.

Notice that in telephony, 64kpbs means 64000 bits per second, whereas
in computer engineering 64k bytes typically means 65536 bytes.

ISDN brings the digital signal all the way to your home or desktop.  With
ISDN, you can place a data call which uses all 56kbps or 64kbps, because
there is no need to convert the signal to analog in your modem and back
to digital at the central office.  The availability of the full bandwidth
presents some interesting technological opportunities:
   -- transmission of high-fidelity compressed audio
   -- transmission of encrypted audio
   -- transmission of lots of data
   -- transmission of other compressed signals, such as video

Basic-rate ISDN (BRI) offers two channels of this service.  In BRI, the
connection between your site and the central office offers 64kbps
bidirectionally on each channel.  Each of these channels may be used
for a voice call, for circuit-switched data, or for X.25 packet
switched data.  Thus, the existing POTS circuit [POTS: Plain Old
Telephone Service, i.e. traditional analog telephony] can be
conditioned to carry two calls at the same time.  (Your mileage may
vary;  you have to specifically order and pay for the various services
from your telephone company, just as you have to order and pay for Call
Waiting for an ordinary phone line.  Also, not all services are
available everywhere; X.25 connectivity between COs is a notable
problem in the Greater Boston area as of 9/93, for example.)

Incidentally, ISDN brings another interesting service to your home or
desktop:  a highly reliable 8000Hz clock signal.  In most cases, the
central office switches, long-distance carriers, and ISDN terminal
equipment all operate with exactly the same clock frequency.  In a
real-time communications environment (like a voice phone call) this
means that there's no need to compensate for differences between the
sampling rates at each end of the call.

One of the other features is that instead of the CO sending an AC ring
signal to activate your bell, it sends a digital packet that tells WHO
is calling (if available), WHAT TYPE of call (speech, datacomm?), the
NUMBER DIALED (maybe one of your aliases) and some other stuff. Your
equipment can then analyze this stuff and make an "intelligent" decision
what to do with it. For example, a phone (with speech-only capacity)
would completely ignore a datacomm call while a Terminal Adapter (ISDN
"modem") or a phone with built-in datacom functions would respond to it.
If you have several "aliases" tied to your line, you can program certain
phones to answer calls for certain numbers only.  Datacomm calls contain
baud rate and protocol information within the setup signal so that the
connection is virtually instantaneous (no messing around with trying

different carriers until both ends match).

curt@kcwc.com (Curt Welch)
etxorst@eos.ericsson.se (Torsten Lif)
oj@vivo.com (Oliver Jones)
Helge.Oldach@Stollmann.DE (Helge Oldach)
------------------------------

2.09) What do ISDN phones cost?

The ISDN sets can cost between $180 for an AT&T 8503T ISDN phone from
Pacific Bell up to $1900 depending on what/how many features are needed.

A recent report states that the price is $536.90 for an AT&T 7506 with
the RS-232 port on the back and $102.70 to get the 507A adaptor to hook
analog devices to my 7506.

Recent quotes were "$200" for a Coretelco 1800 and "$600" for a Fujitsu
SRS 1050.

keyman@doorway.Eng.Sun.COM (Dave Evans)
huntting@futureworld.advtech.uswest.com (Brad Huntting)
spike@coke.std.com (Joe Ilacqua)
scotty@l5next.gagetalker.com (Scott Turner)
------------------------------

2.10) Can you use existing telephone equipment with the voice portion?

Terminal Adapters (TA's) are available that will interface non ISDN terminal
equipment (TE), called TE2, to the S/T interface.  At least one RBOC provides
a modem pool to allow for interchange of data with POTS subscribers.  Bellcore
may approve a standard to allow a analog pair to interface to POTS sets from
--- MsgPost 1.1
 * Origin: Center Field ISDN 901.368.4702 (1:123/301)