From Denis MOREAUX · 1996-04-04 06:59 · #75069 in C_PLUSPLUS
In reply to bios wiping?!?! by Jeffrey Bloss
Hi Jeffrey Bloss,
Saturday, 30 March 1996 14:06:00, Jeffrey Bloss wrote to Filip De Smet
FDS>>> > DEADSET??? did it really wipe the bios chip....gee that sounds
FDS>>> > like so
FDS>>> And why shouldn't it be possible? After all, there are computers
FDS>>> where
FDS>>> can re-program the BIOS (BIOS-upgradable ones), and if it's
FDS>>> software
JB> Some flash BIOS's use a physical jumper to prevent access to
JB> the flash functions. These simply do not allow normal software to
JB> access the flash functions.
That is an Hardware protection against Bios-Wiping, no problem.
JB> All the non-jumpered flash BIOS implementations I've come
JB> across or heard about require three things to start the flash
JB> upgrade process... a cold boot, a keypress combination, and a
JB> special floppy disk.
Seems to be a software protection...
JB> The cold boot + keypress triggers a POST
JB> error, the BIOS checks for the specific key combination, checks for
JB> the floppy if the correct keys are pressed, and allows the flash
JB> process to begin if everything is in place.
And what if the Virus simply implement the flash process routine as it is
stored in the Bios/floppy ???
JB> The problems a virus
JB> would have to overcome before it's able to infect a flash BIOS is
JB> first simulating a POST error, then getting the keystrokes right,
JB> then redirecting the BIOS's search for a floppy to a file on a
JB> fixed disk.
Or directly accessing the ports via IN/OUT commands to enable the BIOS writing
change it then disable the BIOS writing...
JB> The POST error problem alone makes flash BIOS viruses
JB> impossible as far as I can tell, and since the location of the
JB> upgrade files is hard coded into the BIOS itself, the virus would
JB> have to be run from an already infected program or dropper on a
JB> floppy.
Not sure...
The only "software controlled" mean to protect the bios is the following :
have a flip-flop that is resetted when the RESET button is pushed (it's
an hardware control). The bios is then launched (after a push of the RESET
button, you can be sure that it is really the bios) and test for the keys
and the floppy. If these aren't right, it write to a port, setting the
flip-flop. There should be no mean to reset the flip-flop by software and
if it is set, it should be impossible to write to the Flash Rom chip.
Denis MOREAUX
.!. Appuyer sur (F13) pour attraper un virus...
--- Terminate 3.00/Pro
* Origin: 2:293/3212.89 FM 101:320/7105.89 SK 74:292/7101.89 (2:293/3212.89)