From Jon Peterson · 1996-04-10 06:46 · #70599 in CLUB_AMIGA
In reply to A3000 Monitor Problems by Gary Peake
GP> Bill Near needs some A3000 help real bad. If anyone has the posts or
GP> the FAQ concerning the A3000 monitor glitch, I would appreciate
GP> sending it to me email for Bill. A friend of his just bought a used
GP> A3000 that has some squiggly lines at the top of the monitor and
GP> they won't go away.
GP> We did quite a round on that here not long ago ... help!
Gary, here is a message I saved re the monitor problems some time
back:
From: Ed Musgrove Date: 07 Apr 95 09:28
To: Fabian Jimenez Msg#: 4014 <- 10056
Subj.: Amiga 3000 woes...
Area: Amiga
Hi Fabian!
FJ> Help... I have an Amiga 3000 whose display is flaky.
Sounds like you (hopefully) have the infamous A3000 "screen
sparkle" problem. Here is some (edited) capture which might help:
COMMODORE A3000 Video Speckle Defect By Julie Peterson
(LadyHawk@cup.portal.com)
We have discovered a pattern [...]. Here are the symptons:
- Horizontal speckles appearing on the display, worse in
programs that have a lot of screen refreshes or
moving objects or text. Most people initially suspect
a monitor problem, but it's NOT a monitor problem.
- Problem is gradually progressive over a period of weeks
or months, depending on how often you use the computer and
in my case, may have caused the eventual shutdown of my system.
- Programs which save what's on the video display are
a particular problem, as they will save the glitches
also (e.g. DPaint images will save what you draw *and*
the intruding glitches).
- ghosting, double images in flashes, and worse along
the edges and scrollbars are typical as problem worsens.
- the actual RUNNING of programs is not affected. You
can boot workbench and applications just fine, the
'workings' are not effected, just the video output and
in some cases, screen saves with garbage added.
Second, GREAT NEWS. We're starting to get news back from people who are
finding the solution. The posts I got from people who had found the
problem and fixed it themselves (I have yet to get a single letter from
someone who found a dealer able to diagnose this problem) point to a
PAL chip and to Chip RAM. So check these out. The PAL chip is part
number 16L8DCN (and it's inexpensive - yay!). A GAL can be used, as
long as it's programmed for the PAL (16V8GAL). Both these chips are
10 nanoseconds. One person found the problem in the second socketed
bank of Chip RAM, the other found it in the first, soldered bank of RAM
(bad news), but check out the PAL chip first, maybe you'll be lucky.
I'm happy to say, one of the folks on IRC got his computer back in order
($2.50) after being 3 months without it. That made my day.
COMMODORE A3000 Screen Speckle Defect - Chip Available
======================================================
OK! If your problem is genuinely the screen hyphen speckle problem, and
not a different problem (or combination of problems), it appears as if
HT Electronics can help. I just ordered the GAL (Gate Array Logic chip,
I think) from them and they went to some trouble and experimentation to
program it for the PAL parameters. They are happy to supply the solution
to those who need it, but they want to be sure users understand that this
is only a fix for this specific problem. If ou have another problem and
order the chip, you can't hold them responsible if this doesn't fix it!
So be fair to them; they're good guys.
HT Electronics Sunnyvale, CA 1-408-737-0900 16V8GAL programmed to
function like 16L8DCN PAL
I was so thrilled, I didn't even ask what it was going to cost. I know
the chip is cheap, but they had to find a programming solution and there's
shipping too, so it's going to be a bit more, but better than a non-
functional computer! Ask for Sales, if you call HT.
I had this problem for many months and no dealer could help! I called
HT Electronics and got the chip, replaced it, and now all is fine!
Good luck!
... DAM! Mothers Against Dyslexia!
--- FreeMail & Blue Wave/QuickBBS
* Origin: Dark Knight's BBS! 1:383/25@fido or 1:383/26@fido (1:383/25)