Slimelite BBS

Re: Need Tech Help!

Back to CLUB_AMIGA

From Jim Perkowski · 1996-04-10 19:25 · #70269 in CLUB_AMIGA

In reply to Need Tech Help! by Jim Perkowski

In a convoluted conversation 8:06 PM on 8 Apr 96, Jeff Grimmett conveyed to
Jim Perkowski:

JG> In a message dated 07 Apr 96  08:31:00, Jim Perkowski wrote:

 JP>  I would appreciate any kind of help I can get with a 4000 HD floppy
 JP> drive. The spindle motor will not spin when a disk is inserted. I
 JP> took
 JP> the drive apart and tested the disk switch with a meter and it checks
 JP> out fine. But when I tested it with a logic probe the side of the
 JP> switch that is supposed to go to a low state when the switch is
 JP> opened
 JP> remains high. I am having a bit of a tuff time figuring this one out.

JG> Broken return path ("ground" to most people).  If the return's broken,
JG> it'll stay high no matter what.

                         2
                1 -----o o o---- 3
                         |
                         |
                       +5 VDC

 1 and 2 are for the write protect switch and 2 and 3 are for the "disk
in" switch. I can't firgure out why I am getting +5 VDC on pin 3 when
the switch is open. It would really help if I had a schematic of this
drive. :(

"Dolby Surround AC-3 Digital Home Theater. THX Laser Discs in letterbox only!"

... You are in a maze of twisty little passages, all alike.
--- GEcho 1.00+
 * Origin: Akron Connection - Remote Access - 28.8 216-253-9247 (1:2215/110.0)