From Mark Crosby · 1996-03-31 16:16 · #70121 in CLUB_AMIGA
In a message of 21 Mar 96 Gene Wilber wrote to All:
GW> C=2386 BridgeBoard 5 megs Ram 25 mhz
GW> Shared internal floppy drive
GW> 1 external HD floppy drive attached to BridgeBoard
GW> 1084S C= monitor
GW> Standard C= mouse
GW> 1 Connors 200 meg HD
GW> 1 Seagate 40 meg HD
GW> 1 Quantum 270 meg HD
GW> Here's my question: How do i set up Windows on my system, and how do
GW> I get it to run? I have a virtual HD set up on the Seagate with 30 megs
GW> allocated. I run the setup program that came with the Windows disks, but
GW> after I run it, nothing happens. Tried several different options in the
GW> config part, but no luck. Anyone out there that has a 386 BB AND has
GW> Windows running? If so I would like to talk to you and see how you did
GW> it.
Well Where do I start??? First off will any thing else run from dos? I had a simmuler problem!! It was the Ms/dos disks v5.0 that came with the BB. I upgraded to MS/DOS 6.2 and all of my problems like that went away! Next how much ram is on the BB? Are you opening a window from the workbench? Are you opening the right window? Color or monicrome? Are you aware you only get CGA on the BB with out a display card? God it could be so many things.. I have a Comm 386 bb upgraded to a 486dx50 and a 16 bit SCSI interface with its own 245 meg Maxtor HD with a Diamond Stealth SVGA 1 meg Windows accelerator.. Sanyo 4* speed CD Rom too.. Oh I also run windows 3.11. I think we are boardering on off topic here if you like you can call me voice. 505-439-8228
[ Blue Ribbon / Freedom of Speech! ]
--- Spot 1.3a #774
* Origin: Mac's Point, Alamogordo NM, 505-439-8238 (1:308/60.1)