Slimelite BBS

A4000TE and '060

Back to CLUB_AMIGA

From Mark Squire · 1996-04-07 16:29 · #70037 in CLUB_AMIGA

Will,
-> The problem with just upping the speed on a processor is that there is a
-> corresponding amount of heat built up. If you've ever touched a 486 chip
-> after it had been running for a while, you know what I mean. The '040 has
-> the same problem. Remember when PP&S started putting out their 28MHZ '040
-> boards? they were the first I ever saw that used a chip fan. Without it, the
-> chip will melt internally even just running 3 mhz over the posted 25 mhz
-> limit. I wouldn't suggest speedning up any chip without some kind of heat
-> sink.

This is my arguement for why the x86 line is going to die.  The architecture
further dwarfs as speed increases, and eventually, the chip just can't take it.
 From what I understand RISC chips are the wave of the future because they
don't get as hot. . .

SQuire

--- QScan/PCB v1.17b / 01-0154
 * Origin: MicroLink BBS * Dinuba, CA 209-591-8753 (1:214/80)