From Mike DuPreez · 1996-04-11 15:32 · #69174 in KERRANG
In reply to Help by Steve Farrow
-=> Quoting Steve Farrow to All <=- SF> Can anyone help !!!!!!I have an Olivetti PC.When the computer is SF> turned onfor the first time it reports that i have 4096 K of memorybut SF> when the Amibios screen comes up with the system infoit says that i SF> have only 3072 Ext.memory and 640 K Base memorytotal 3712.No matter SF> how,or what i try i can't get back the 384 K of memory .Is this normal SF> for a PC ? Hi Steve Don't panic, your setup is completely normal, the PC's memory map is laid out in a strange way, the first 640K is the Conventional memory which is used by DOS, then comes the 384K of Upper memory, which takes care of the first 1Meg, above 1Meg is the Extended memory, which in your case leaves 3Meg. The Upper memory between 640K and 1Meg is used by the system to load drivers for the system hardware, such as the video card, it also uses a 64K block as a page frame if Expanded memory is enabled. The good news is that this memory isn't exactly lost, some of it is left spare after the system takes what it needs, and by use of the EMM386 line in the config.sys file, it is possible to load the device drivers for things like your mouse, CD ROM, soundcard, Smartdrive, and all sorts of other goodies into the Upper memory area, which leaves more room in the Conventional memory free for DOS programmes to use. By careful tweaking of the autoexec.bat and config.sys it is usually possible to have well over 600K free, even with Expanded memory switched on,(I have 615K), which is normally enough to start most games without the need for a boot floppy. Cheers, Mike ... DOS never says "EXCELLENT command or filename"... --- Blue Wave/386 v2.20 [NR] * Origin: Alba Maximus, Glasgow [Line1 0141 880 7863 V34] (2:259/2)