Slimelite BBS

Could someone explain?...

Back to KERRANG

From Lee Davison · 1996-04-01 16:25 · #69087 in KERRANG

Hi Stephen !

In a message of 24 Mar 96 Stephen Hill wrote to All:

 SH> Errrm, could someone explain why, when I build the following circuit (a
 SH> stereo sound card which plugs into the parallel port on a PC) I can
 SH> turn the power which is going to the PSU off at the mains, and nothing
 SH> happens to the quality of the sound.

It's probably being powered from the paralell port.

 SH> If I unplug the low voltage side
 SH> of the PSU from the circuit, the quality goes down, but if I keep the
 SH> PSU plugged into the circuit, but turned off at the mains, the whole
 SH> thing works just as well!

The supply decoupling caps are in the psu I take it. Try it without a PSU but with a 400uF capacitur across the supply pins.

 SH> I suspect the parallel port, but is it safe
 SH> to draw this power from the port or is it likely to damage it by
 SH> drawing too much current?

Well it's worked so far but I wouldn't use it like that.

Cheers,
     __
 __ ///  Lee Davison :- Sysop
 \\X//  The Unseen University
  ~~~


--- Spot 1.3a Unregistered
 * Origin: Lee's laboratory (2:2500/167.42)