From Richard Murray · 1996-03-29 23:37 · #69061 in KERRANG
Quoting Simon Jones (in BOFFINS)...
SJ> I have now fixed it enough that it will record and play tapes again but i
SJ> have never bothered to try it with an aerial as i am only using it as a
SJ> player...
SJ> The problem is that it refuses to accept the fact that a tape has been
SJ> removed and the loading motor "strains" to attempt loading of nothing!!!
My betamax failed to notice the start of tape when rewinding (loud snapping
noises followed). Upon inspection, the sensor was covered in crap. I
unsoldered it, soaked it in a little Vodka (well, I was out of isopropyl) and
scraped the gunk off it and the PCB. It looked like rust. Where from? I dunno.
Anyhow, I refitted the sensor and now it works fine.
Same similar fault on another betamax where this weird 'rust' had shorted the
transistor that applies the startup pulse to the head motor.
As for this phantom rust... Muuuullllddddeeeerrrr!!!!
Moral of this message: Try poking around. Something might just be a bit
cruddy.
___
/__/
/ \ichard.
PS: If anybody has that little metal rod with a cog at both ends as used in
the Sony SL-C9UB Betamax tape load/eject mechanism (the bit that keeps the
left side moving with the right), I'd be *VERY* interested to hear from
you. Currently unloading/loading a tape is done with a screwdriver and a
lot of patience. ;^) [yup - some daft moron nicked this piece when it
was being auctioned off!]
--- 8 out of 10 BSE-infected cows say '!ooooooooM'.
* Origin: Worrying Heights [Encina] (2:254/86.1)