From Zane Allford · 1996-04-11 14:39 · #65228 in REAL_ALE
In reply to Re: Monitor problems by Peter Hutchison
Hi Peter,
On 05 Apr 96,Peter Hutchison communicated with me on the fascinating topic of Monitor problems:
ZA>> I've got this autosync monitor that I bought from Derek Morgan. It is a
ZA>> Microvitec model number 20H728ES2. So, my question is, do I need a
ZA>> special lead? If so what pins need to be connected, where can I get one
ZA>> from etc. I am connecting to a 9 pin port on the monitor marked
ZA>> analogue. There is also a similar port marked TTL plus some BNC type
ZA>> connectors marked SYNC, R, G and B. Can I use any of these with a video
ZA>> as a TV tuner in a similar way to what I did with the CM8833?
PH> The analogue port is not the one, the best ports to use are the TTL one
PH> or the R.G.B ports which the Amiga does support. Places like Tandy
PH> produce lots of leads for different monitors!
I've got a lead for it that works now but whenever I run any screen modes
other than Pal HiRes, when I change screens eg going from Spot to GoldEd,
the screen goes black and takes about 30s to become bright enough to see
again. :o(
Be seeing you,
Zane (From Brynmawr, Gwent, South Wales!)
... Does fuzzy logic tickle?
--- Spot 1.3a #900
* Origin: Going up in the world with Elevate BBS!! (2:251/18.3)