Slimelite BBS

drive probs

Back to REAL_ALE

From Andy Dalton · 1996-04-10 03:49 · #65095 in REAL_ALE

In reply to drive probs by Mark Davies

Hello Mark, you wrote to all about "drive probs",

 MD> help. please help
 MD> 
 MD> can anybody point me in the right direction with a prob I have with my
 MD> floppy drive.
 MD> lately my drive has been trying to read a disk when there aint one in
 MD> the drive this goes on for a considrable time.
 MD> I also get the message off vc that the disk in the drive has a
 MD> non-standard boot block. what disk in the drive :-( now is it the drive
 MD> itself or is it my ?paula chip dying.
 MD> 
 MD> any help would be most grateful
 MD> 
 MD> btw if it is the chip any idea on possible repair costs :-((

I would take a guess that it's you little switch inside the drive unit.
Take your machine to bits and take the top off your floppy drive. You'll
see two little plastic needles pointing up. One will line up with the
write-protect tab on your disks, the other won't. It's this second one that
I guess has broken off. If you can find the plastic needle bit just
superglue it back on. If it hasn't actually broken it may have stuck down
so the miggy thinks there's always a disk in the drive.

It's more likely to be this than your Paula up the swanny. You don't say
what machine you have....if your Paula is knack'd and you have an
A500/600/1500/2000 then you can just pop it out and pop a new one in for
about 13 quid.  If it's an A1200 with surface mounted Paula then it could
cost about 20 to 25 quid.

I hope it's the plastic switch ;)

bye for now,
    _____
   //  //__ __/
  //--/// //_//_/      Fido :  2:2500/504.2
 //  //________/

--- April V1.07+
 * Origin: The Dark Moon BBs....Pure Amiga! (2:2500/504.2)